Selecting the Right Coating Substrate
TORO presents a diverse range of substrates, allowing for countless opportunities to skillfully match material characteristics with the specific requirements of customers' applications. Depending on the desired performance attributes for a particular use, our substrates can be crafted through knitting, weaving, or non-woven techniques.
Here is the list of commonly used substrates for coating.
Cotton:
- Natural cellulosic fiber exhibits good abrasion resistance.
- It demonstrates good adhesion to rubber compounds.
- It possesses excellent resistance to alkalis, although it degrades when exposed to hot acids.
- The fiber remains resistant to melting even at high temperatures.
Polyester:
- This multifunctional synthetic fiber has the ability to absorb oil and grease.
- It exhibits excellent abrasion resistance.
- The fiber is resistant to various chemicals.
- It does not absorb water.
- At high temperatures, the fiber has a melting point.
- It is resistant to stretching.
- The fiber does not shrink easily.
- It is RF weldable, allowing for radio frequency welding.
- The synthetic fiber is known for its strength.
Nylon:
- The synthetic fiber is highly abrasion-resistant.
- It has the capability to absorb oil and grease.
- The fiber does not absorb water.
- It possesses elastic properties.
- It is resistant to staining.
- The fiber has a melting point at high temperatures.
- It can be RF welded, allowing for radio frequency welding.
Rayon:
- The fiber is marketed and sold as artificial silk, offering high absorbency.
- However, a drawback is that it experiences a loss of strength when exposed to moisture.
- It demonstrates poor resistance to abrasion and tends to be more expensive than other materials.
- Additionally, it has a higher tendency to stretch and shrink compared to cotton.
Aramid:
- The fiber exhibits a high strength-to-weight ratio, along with high tenacity and modulus.
- It has low elongation and creep properties.
- The fiber demonstrates good abrasion resistance.
- It does not have a specific melting point, but is resistant to degradation and shows low flammability.
- The fiber is non-conductive.
- It is resistant to organic solvents but is sensitive to acids, salts, and UV radiation.
Glass:
- The fiber possesses a high tensile strength and exhibits excellent resistance to heat and flame.
- It acts as an electric insulator.
-
The fiber does not absorb water and demonstrates
resistance to acid and other chemical agents.
For any query reach us at: toro@mrtglobal.com | +91 9925111660
Know More about TORO
Comments
Post a Comment